Less maintenance: Designed for commercial spaces and hence, we have taken extra care during design and specifying of the part and components to avoid any flimsy joints. The entire structure is made with heavy gauge brackets, tubular parts, and Metal Sections.
Availability of Spares: In event of any failure of components, you will able to procure the spares or request for repair of the TSI recliners.
TSI Professional Loungers Series
Comfortable - Robust - Reliable (Designed for Commercial Cinemas)
Lounger installation is highly dependent on the type and application of Loungers.
For example, If you wish to use the Lounger for the living room or home theatre, you may opt not to Anchor the Loungers. its stand-alone type units and it's quite stable as equally to other household sofas. However, you have to slip-on the vertex brackets to insert the back into its fixing bracket while unboxing the Lounger from the package.
For commercial installations, it is recommended to go with at lease cluster anchoring. Use an approved floor plan to establish hole locations for the footplates. Note that the Lounger radius line coincides with the front hole of the footplate. Accurate center-to-center width spacing is critical to a proper installation. Tolerance on the Lounger width dimension is plus or minus 1/8". It is critical not to exceed this tolerance on width spacing.
Please follow the project instruction sheet supplied along with project documents to install the Lounger specific product as per your specific installation plan. Please also understand the project-specific installation instruction through TSI technical Experts over email or phone.
The TSI Lounger chairs are designed and built for years of reliable service. The durability and beauty of the chair will serve the performance requirement, however, be greatly enhanced with proper care and inspection, as described below. Each project will be provided with an Operations and Maintenance (O&M) Manual which will describe in detail the maintenance measures to be taken by onsite personnel. For more information on the care of the veneer and fabric components of your product, please refer to the Finishes section of the Theatre Solutions binder.
Inspection and Cleaning
In the first year after the original installation, it is recommended that the chairs be inspected quarterly to ensure that all chairs components remain secure to the floor and that the seats and backs remain tight. After the first year, this inspection interval can become longer, but should never exceed 6 months.
There are no components in the TSI Lounger chair which require lubrication. The mechanism is designed in such a way that it does not require any lubrication.
Besides inspecting for loose screw attachments, there should not be any routine need for readjustment. If, however, a loose connection is discovered, please refer to the appropriate drawing and instructions for installing the subject component. These drawings and instructions can be found in the O&M Manual.
The TSI Lounger chair has been designed and tested to achieve optimum performance and durability. In general, onsite maintenance personnel can provide the appropriate service to correct problems if they have the necessary spare parts and installation instructions.
In the event that a problem with the performance or finish of the Lounger occurs, it is often possible for immediate on-site remedies. TSI recommends that any loose component should be inspected for any visible evidence of breakage. If evidence is found, the part should be immediately replaced. If there is no evidence of breakage, the attachment hardware should be checked to insure tightness.
Obtaining Replacement Parts
A complete list of spare parts provided with the original installation is included in the O&M Manual. If any additional parts are required, simply contact Theatre Solutions and refer to the appropriate part number or the description listed in a drawing depicting the component.
For service work which cannot be executed by building user, contact Theatre Solutions and we will assist in arranging for a visit by qualified technicians.
Shipping Back to TSI
Prior to returning any component part(s) to Theatre Solutions, please contact us by phone or fax for instructions on the packaging and shipment method.